Regex Pattern to Match, Excluding when… / Except between

–Edit– The current answers have some useful ideas but I want something more complete that I can 100% understand and reuse; that’s why I set a bounty. Also ideas that work everywhere are better for me than not standard syntax like \K

This question is about how I can match a pattern except some situations s1 s2 s3. I give a specific example to show my meaning but prefer a general answer I can 100% understand so I can reuse it in other situations.

Example

I want to match five digits using \b\d{5}\b but not in three situations s1 s2 s3:

s1: Not on a line that ends with a period like this sentence.

s2: Not anywhere inside parens.

s3: Not inside a block that starts with if( and ends with //endif

I know how to solve any one of s1 s2 s3 with a lookahead and lookbehind, especially in C# lookbehind or \K in PHP.

For instance

s1 (?m)(?!\d+.*?\.$)\d+

s3 with C# lookbehind (?<!if\(\D*(?=\d+.*?//endif))\b\d+\b

s3 with PHP \K (?:(?:if\(.*?//endif)\D*)*\K\d+

But the mix of conditions together makes my head explode. Even more bad news is that I may need to add other conditions s4 s5 at another time.

The good news is, I don’t care if I process the files using most common languages like PHP, C#, Python or my neighbor’s washing machine. 🙂 I’m pretty much a beginner in Python & Java but interested to learn if it has a solution.

So I came here to see if someone think of a flexible recipe.

Hints are okay: you don’t need to give me full code. 🙂

Thank you.

  • 1

    \K is no special php syntax. Please elaborate and clarify what you want to say. If you aim for telling us that you don’t need a “complicated” solution you have to say what is complicated for you and why.

    – 

  • @hakre You mean because ruby now using it and it started in perl?

    – 

  • 1

    No, because it’s PCRE that is not PHP (nor Ruby). Perl is different however PCRE aims to be Perl Regex compatible.

    – 




  • Your s2 and s3 requirements appear to be contradictory. s2 implies that parentheses are always matched and may be nested, but s3 requires that the: "if(" open paren be closed, not with a ")", but rather with a: "//endif"? And if for s3 you really meant that the if clause should be closed with: "//endif)", then the s3 requirement is a subset of s2.

    – 




  • @hakre Yes I know PCRE but to explain, question is about programming language… it says especially in C# lookbehind or \K in PHP… But C# lookbehind not just C# it’s .NET so you can complain too I say C# not .NET 🙂 And in reply I say Ruby not Onigurama that’s bad too… Is there another language that use PCRE? Not talking about Notepad++ or server tools this is question about using feature in language I hope the explain and sorry if it looks wrong

    – 




Hans, I’ll take the bait and flesh out my earlier answer. You said you want “something more complete” so I hope you won’t mind the long answer—just trying to please. Let’s start with some background.

First off, this is an excellent question. There are often questions about matching certain patterns except in certain contexts (for instance, within a code block or inside parentheses). These questions often give rise to fairly awkward solutions. So your question about multiple contexts is a special challenge.

Surprise

Surprisingly, there is at least one efficient solution that is general, easy to implement and a pleasure to maintain. It works with all regex flavors that allow you to inspect capture groups in your code. And it happens to answer a number of common questions that may at first sound different from yours: “match everything except Donuts”, “replace all but…”, “match all words except those on my mom’s black list”, “ignore tags”, “match temperature unless italicized”…

Sadly, the technique is not well known: I estimate that in twenty SO questions that could use it, only one has one answer that mentions it—which means maybe one in fifty or sixty answers. See my exchange with Kobi in the comments. The technique is described in some depth in this article which calls it (optimistically) the “best regex trick ever”. Without going into as much detail, I’ll try to give you a firm grasp of how the technique works. For more detail and code samples in various languages I encourage you to consult that resource.

A Better-Known Variation

There is a variation using syntax specific to Perl and PHP that accomplishes the same. You’ll see it on SO in the hands of regex masters such as CasimiretHippolyte and HamZa. I’ll tell you more about this below, but my focus here is on the general solution that works with all regex flavors (as long as you can inspect capture groups in your code).

Thanks for all the background, zx81… But what’s the recipe?

Key Fact

The method returns the match in Group 1 capture. It does not care at
all about the overall match.

In fact, the trick is to match the various contexts we don’t want (chaining these contexts using the | OR / alternation) so as to “neutralize them”. After matching all the unwanted contexts, the final part of the alternation matches what we do want and captures it to Group 1.

The general recipe is

Not_this_context|Not_this_either|StayAway|(WhatYouWant)

This will match Not_this_context, but in a sense that match goes into a garbage bin, because we won’t look at the overall matches: we only look at Group 1 captures.

In your case, with your digits and your three contexts to ignore, we can do:

s1|s2|s3|(\b\d+\b)

Note that because we actually match s1, s2 and s3 instead of trying to avoid them with lookarounds, the individual expressions for s1, s2 and s3 can remain clear as day. (They are the subexpressions on each side of a | )

The whole expression can be written like this:

(?m)^.*\.$|\([^\)]*\)|if\(.*?//endif|(\b\d+\b)

See this demo (but focus on the capture groups in the lower right pane.)

If you mentally try to split this regex at each | delimiter, it is actually only a series of four very simple expressions.

For flavors that support free-spacing, this reads particularly well.

(?mx)
      ### s1: Match line that ends with a period ###
^.*\.$  
|     ### OR s2: Match anything between parentheses ###
\([^\)]*\)  
|     ### OR s3: Match any if(...//endif block ###
if\(.*?//endif  
|     ### OR capture digits to Group 1 ###
(\b\d+\b)

This is exceptionally easy to read and maintain.

Extending the regex

When you want to ignore more situations s4 and s5, you add them in more alternations on the left:

s4|s5|s1|s2|s3|(\b\d+\b)

How does this work?

The contexts you don’t want are added to a list of alternations on the left: they will match, but these overall matches are never examined, so matching them is a way to put them in a “garbage bin”.

The content you do want, however, is captured to Group 1. You then have to check programmatically that Group 1 is set and not empty. This is a trivial programming task (and we’ll later talk about how it’s done), especially considering that it leaves you with a simple regex that you can understand at a glance and revise or extend as required.

I’m not always a fan of visualizations, but this one does a good job of showing how simple the method is. Each “line” corresponds to a potential match, but only the bottom line is captured into Group 1.

Regular expression visualization

Debuggex Demo

Perl/PCRE Variation

In contrast to the general solution above, there exists a variation for Perl and PCRE that is often seen on SO, at least in the hands of regex Gods such as @CasimiretHippolyte and @HamZa. It is:

(?:s1|s2|s3)(*SKIP)(*F)|whatYouWant

In your case:

(?m)(?:^.*\.$|\([^()]*\)|if\(.*?//endif)(*SKIP)(*F)|\b\d+\b

This variation is a bit easier to use because the content matched in contexts s1, s2 and s3 is simply skipped, so you don’t need to inspect Group 1 captures (notice the parentheses are gone). The matches only contain whatYouWant

Note that (*F), (*FAIL) and (?!) are all the same thing. If you wanted to be more obscure, you could use (*SKIP)(?!)

demo for this version

Applications

Here are some common problems that this technique can often easily solve. You’ll notice that the word choice can make some of these problems sound different while in fact they are virtually identical.

  1. How can I match foo except anywhere in a tag like <a stuff...>...</a>?
  2. How can I match foo except in an <i> tag or a javascript snippet (more conditions)?
  3. How can I match all words that are not on this black list?
  4. How can I ignore anything inside a SUB… END SUB block?
  5. How can I match everything except… s1 s2 s3?

How to Program the Group 1 Captures

You didn’t as for code, but, for completion… The code to inspect Group 1 will obviously depend on your language of choice. At any rate it shouldn’t add more than a couple of lines to the code you would use to inspect matches.

If in doubt, I recommend you look at the code samples section of the article mentioned earlier, which presents code for quite a few languages.

Alternatives

Depending on the complexity of the question, and on the regex engine used, there are several alternatives. Here are the two that can apply to most situations, including multiple conditions. In my view, neither is nearly as attractive as the s1|s2|s3|(whatYouWant) recipe, if only because clarity always wins out.

1. Replace then Match.

A good solution that sounds hacky but works well in many environments is to work in two steps. A first regex neutralizes the context you want to ignore by replacing potentially conflicting strings. If you only want to match, then you can replace with an empty string, then run your match in the second step. If you want to replace, you can first replace the strings to be ignored with something distinctive, for instance surrounding your digits with a fixed-width chain of @@@. After this replacement, you are free to replace what you really wanted, then you’ll have to revert your distinctive @@@ strings.

2. Lookarounds.

Your original post showed that you understand how to exclude a single condition using lookarounds. You said that C# is great for this, and you are right, but it is not the only option. The .NET regex flavors found in C#, VB.NET and Visual C++ for example, as well as the still-experimental regex module to replace re in Python, are the only two engines I know that support infinite-width lookbehind. With these tools, one condition in one lookbehind can take care of looking not only behind but also at the match and beyond the match, avoiding the need to coordinate with a lookahead. More conditions? More lookarounds.

Recycling the regex you had for s3 in C#, the whole pattern would look like this.

(?!.*\.)(?<!\([^()]*(?=\d+[^)]*\)))(?<!if\(\D*(?=\d+.*?//endif))\b\d+\b

But by now you know I’m not recommending this, right?

Deletions

@HamZa and @Jerry have suggested I mention an additional trick for cases when you seek to just delete WhatYouWant. You remember that the recipe to match WhatYouWant (capturing it into Group 1) was s1|s2|s3|(WhatYouWant), right? To delete all instance of WhatYouWant, you change the regex to

(s1|s2|s3)|WhatYouWant

For the replacement string, you use $1. What happens here is that for each instance of s1|s2|s3 that is matched, the replacement $1 replaces that instance with itself (referenced by $1). On the other hand, when WhatYouWant is matched, it is replaced by an empty group and nothing else — and therefore deleted. See this demo, thank you @HamZa and @Jerry for suggesting this wonderful addition.

Replacements

This brings us to replacements, on which I’ll touch briefly.

  1. When replacing with nothing, see the “Deletions” trick above.
  2. When replacing, if using Perl or PCRE, use the (*SKIP)(*F) variation mentioned above to match exactly what you want, and do a straight replacement.
  3. In other flavors, within the replacement function call, inspect the match using a callback or lambda, and replace if Group 1 is set. If you need help with this, the article already referenced will give you code in various languages.

Have fun!

No, wait, there’s more!

Ah, nah, I’ll save that for my memoirs in twenty volumes, to be released next Spring.

Do three different matches and handle the combination of the three situations using in-program conditional logic. You don’t need to handle everything in one giant regex.

EDIT: let me expand a bit because the question just became more interesting 🙂

The general idea you are trying to capture here is to match against a certain regex pattern, but not when there are certain other (could be any number) patterns present in the test string. Fortunately, you can take advantage of your programming language: keep the regexes simple and just use a compound conditional. A best practice would be to capture this idea in a reusable component, so let’s create a class and a method that implement it:

using System.Collections.Generic;
using System.Linq;
using System.Text.RegularExpressions;

public class MatcherWithExceptions {
  private string m_searchStr;
  private Regex m_searchRegex;
  private IEnumerable<Regex> m_exceptionRegexes;

  public string SearchString {
    get { return m_searchStr; }
    set {
      m_searchStr = value;
      m_searchRegex = new Regex(value);
    }
  }

  public string[] ExceptionStrings {
    set { m_exceptionRegexes = from es in value select new Regex(es); }
  }

  public bool IsMatch(string testStr) {
    return (
      m_searchRegex.IsMatch(testStr)
      && !m_exceptionRegexes.Any(er => er.IsMatch(testStr))
    );
  }
}

public class App {
  public static void Main() {
    var mwe = new MatcherWithExceptions();

    // Set up the matcher object.
    mwe.SearchString = @"\b\d{5}\b";
    mwe.ExceptionStrings = new string[] {
      @"\.$"
    , @"\(.*" + mwe.SearchString + @".*\)"
    , @"if\(.*" + mwe.SearchString + @".*//endif"
    };

    var testStrs = new string[] {
      "1." // False
    , "11111." // False
    , "(11111)" // False
    , "if(11111//endif" // False
    , "if(11111" // True
    , "11111" // True
    };

    // Perform the tests.
    foreach (var ts in testStrs) {
      System.Console.WriteLine(mwe.IsMatch(ts));
    }
  }
}

So above, we set up the search string (the five digits), multiple exception strings (your s1, s2 and s3), and then try to match against several test strings. The printed results should be as shown in the comments next to each test string.

Your requirement that it’s not inside parens in impossible to satify for all cases.
Namely, if you can somehow find a ( to the left and ) to the right, it doesn’t always mean you are inside parens. Eg.

(....) + 55555 + (.....) – not inside parens yet there are ( and ) to left and right

Now you might think yourself clever and look for ( to the left only if you don’t encounter ) before and vice versa to the right. This won’t work for this case:

((.....) + 55555 + (.....)) – inside parens even though there are closing ) and ( to left and to right.

It is impossible to find out if you are inside parens using regex, as regex can’t count how many parens have been opened and how many closed.

Consider this easier task: using regex, find out if all (possibly nested) parens in a string are closed, that is for every ( you need to find ). You will find out that it’s impossible to solve and if you can’t solve that with regex then you can’t figure out if a word is inside parens for all cases, since you can’t figure out at a some position in string if all preceeding ( have a corresponding ).

Hans if you don’t mind I used your neighbor’s washing machine called perl 🙂

Edited:
Below a pseudo code:

  loop through input
  if line contains 'if(' set skip=true
        if skip= true do nothing
        else
           if line match '\b\d{5}\b' set s0=true
           if line does not match s1 condition  set s1=true
           if line does not match s2 condition  set s2=true
           if s0,s1,s2 are true print line 
  if line contains '//endif' set skip=false

Given the file input.txt:

tiago@dell:~$ cat input.txt 
this is a text
it should match 12345
if(
it should not match 12345
//endif 
it should match 12345
it should not match 12345.
it should not match ( blabla 12345  blablabla )
it should not match ( 12345 )
it should match 12345

And the script validator.pl:

tiago@dell:~$ cat validator.pl 
#! /usr/bin/perl
use warnings;
use strict;
use Data::Dumper;

sub validate_s0 {
    my $line = $_[0];
    if ( $line =~ \d{5/ ){
        return "true";
    }
    return "false";
}

sub validate_s1 {
    my $line = $_[0];
    if ( $line =~ /\.$/ ){
        return "false";
    }
    return "true";
}

sub validate_s2 {
    my $line = $_[0];
    if ( $line =~ /.*?\(.*\d{5.*?\).*/ ){
        return "false";
    }
    return "true";
}

my $skip = "false";
while (<>){
    my $line = $_; 

    if( $line =~ /if\(/ ){
       $skip = "true";  
    }

    if ( $skip eq "false" ) {
        my $s0_status = validate_s0 "$line"; 
        my $s1_status = validate_s1 "$line";
        my $s2_status = validate_s2 "$line";

        if ( $s0_status eq "true"){
            if ( $s1_status eq "true"){
                if ( $s2_status eq "true"){
                    print "$line";
                }
            }
        }
    } 

    if ( $line =~ /\/\/endif/) {
        $skip="false";
    }
}

Execution:

tiago@dell:~$ cat input.txt | perl validator.pl 
it should match 12345
it should match 12345
it should match 12345

Leave a Comment